Wednesday, June 1, 2011

A Bit More Progress...

It has been awhile since my last post but I have been working a few hours here and there. Here is what has happened since my last post...

The door got put back together and sealed. Here I had taped off the "Z" stripe for polish...

I used the felt buff chucked in my drill and some brown compound to give it a good shine..

I then taped off the stripe and primed the door...
It is now set aside waiting for paint.

I removed the section of the floor where the leaky door had started to rot and delaminate the floor...

Let me apologize for the crummy pictures. I swear this camera is getting worse and worse. Here is the new section of floor installed...

You might have noticed that the closet panel was also removed. I didn't want to take this out but it is just too far gone..

I have been hunting for rot and trying to find it and remove it. Here is some more rot that must have come from a leaky black water tank vent cap...

I have also been tackling replacing the framing. I removed all of the rotted framing and tried to make the new framing more substantial. Here is the curbside done up to the door...

A before and after of the baggage door framing...

Again, sorry about these crappy pictures. Here is the curbside wheel well framing...

Here is the street side framing done all the way up to the front...

Once I was done with each side framing I went to the back to finish that up. I had bought a Hehr Standard window for the rear window which was gone. I had never really fit the window in the hole to because we had the rear window sealed up with plastic since we bought the trailer. It had always been in the back of my mind. Really because I wanted to see if the PO had altered the opening to fit the AC unit in the window opening. I didn't think that the actual replacement window wouldn't fit. Talk about a oh $#!@ moment. I study a lot about Shastas but even I didn't know (or even think) about the fact that an Airflyte would have a larger window than a 16 SC. Luckily, I discovered this at this point in the work. I just needed to make the opening larger to accommodate the bigger window. I removed all of the rear cross members to start fresh...

I redid all of the rear framing which was going to get redone anyway...

Going back to a few previously discussed items...

Here is a horrible shot of the grinding, priming and painting I did on the entire frame...
 I also did the wheel wells which probably benefited more from this. They are on the verge of rusting away. I think the rust removal and paint will keep them serviceable for a while. All of this sort of thing is really easier when you do a complete frame off but that wasn't in the cards this go around. I had to make due with the options I have. It was a lot of work to spend that much time under the trailer but I feel better knowing I have done what I can to make sure it isn't rusting away.

I also got the new tires mounted on the rims...
Again. These will probably end up another color but I can do that later. I am still hunting for a good buy on vintage 15" caps. I have really been eyeing up early 50's Oldsmobile caps. I like the design they had. Then again I keep seeing other caps on ebay that I like also. Maybe at some point I can have more than one set of caps and could change them out to suit whatever mood we are in.

I am sure I will have more updates soon. Stay tuned...

3 comments:

Grace | Fashion Plants said...

Thanks Atomic Age! I just started lurking on your Shasta Louise project. We have a Shasta 20, and will be doing numerous repairs as well.

Unknown said...

Love those bones...great job. You are so meticulous, it is going to be beautiful!

I went through a lot of this on a 59 Aljo until the wind ripped some of the siding open like a can opener! She just folded after that. Wasn't any where near finished...it broke my heart. But good things come to those who wait...69 Shasta 1400. She has had some modifications but mostly minor. I want to tackle the door it is really warped. Off on my first road trip tomorrow...I've never even hauled a trailer but I know I will love it!

ain't for city gals said...

looking through your last couple of posts....you have got a lot done lately! Good for you fixing all that dry rot..I just heard of a girl pulling a trailer..got caught in a strong wind and completely picked up the trailer and destroyed it....luckily no one was hurt...that dry rot leaves nothing left for support...you have to do it!